2125 196th St SW
Suite 115
Lynnwood, WA
98036
Phone: 425-774-3257

   Attn:
    Government Buyers

DUNS Number
362928293

CAGE Code
3ZDG4

Registered with
 CCR

    NAICS Code 333411
FSC Code 4460
SIC Code 3564

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Omnitec Design, Inc.

Omnitec equipment combines the best technologies for scrubbing the air of fine dust and biological contaminants. Our equipment is used by abatement and restoration contractors, health care facilities, industrial and commercial applications and a wide range of environmental abatement projects. We have been manufacturing air purification and filtration equipment since 1988 and our equipment is used worldwide.

OmniAire PAC Machines for Healthcare and First Response Applications

OmniAire PAC air purification equipment removes sub-micron particulates, chemical and biological fumes, and gases. This equipment is being used to provide positive or negative pressure as required for decontamination shelters, first response shelters, mobile hospitals and portable hospital isolation anterooms.

It is designed to operate in healthcare facilities where ambient air is relatively dust free, but a high level of air purification is required. The OmniAire PAC uses a MERV11 primary filter and High Intensity UVGI lights to control bio-contaminants and odors. Air is then exhausted through the final 99.99% @ 0.3 micron efficiency HEPA filter to insure its purity.

OmniAire PAC  air purification equipment is used to provide cleaner and safer environments in hospitals, pharmacies, morgues, mortuaries, clean rooms, veterinary clinics, and many other locations.

 

OmniAire HEPA Negative Air Machines for Asbestos Abatement, Mold Abatement, and Construction Projects

OmniAire HEPA negative air machines are used by general contractors, painters, wood refinishers, marine contractors and asbestos and mold abatement contractors. Our equipment is known for its smaller size, light weight, and reliability. OmniAire equipment features variable speed controls. The ability to precisely regulate the airflow is especially useful on smaller projects where exhausting too much air from the containment could cause the poly walls to be pulled away from the containment frame.

OmniAire HEPA negative air machines equipped with special carbon filters are used for Meth lab cleanup and other bio-chemical abatement jobs.

OmniAire neg air machines with specially designed carbon vapor trap filters are being used to remove mercury vapor generated by the recycling of fluorescent lights.

OmniAire negative air machines often have to pass DOP or equivalent tests before placed on the job. Our equipment is sold through USA and Canada and some of the states, such as California require DOP or equivalent tests performed on the job site. Our machines come with standard HEPA 99.97%, 0.3 micron or optional HEPA 99.99%, 0.3 micron individually tested and certified filters.

All OmniAire equipment is tested by the ETL lab to comply with UL and CSA safety requirements.

Negative Air Machines Group Photo