|
OA 200V Lab Air Filtration System
The OmniAire 200V is a modular portable air filtration
system used for removal of hazardous airborne contaminants is areas
where a small airflow and quiet operation is required. Glove bags, work
benches, welding benches, and de-soldering stations are some examples of
applications for this machine. The modules can be stacked atop one another
or separated by as much as 25 feet. Also by adding an optional Y
adapter dual inlet hoses may be connected.
If you are dealing with hazardous material such as nuclear
waste the advantage of the modular design is that only the HEPA module must
be discarded as the blower will not be contaminated. The
HEPA module
contains a HEPA filter sealed between two ABS plastic adapters which allows
for easy connection to the blower. An optional
carbon filter module
is
available and can be either used in place of the HEPA module or in
conjunction with it.
SPECIFICATIONS
Airflow - 80-200 cfm
Airflows are based on blower
manufacturer curves. Different HEPA filters may
cause the flow to vary.
Weight - 20 lbs
Blower Module Dimensions - 12.5" wide 12.5" high
13"
long
Filter Module Dimensions - 12" wide 12" high 18" long
Cabinet - UL94 V0 Flammability Rating ABS Plastic
Filtration -
Standard HEPA Filter - Metal Frame 99.99% Efficiency @
.3 micron
individually tested and certified. Size 12"x12"x6"
Optional - Carbon Filter Module for odor control
Power Requirement - 115 VAC/ 50-60 Hz 1.10 amps
Controls -
Variable Speed Controller
Digital Hour Meter
Inlet Ring Size - 3" diameter
Outlet Ring Size - 6" diameter
Ordering Information
ITEM
PART #
OmniAire OA200V Negative Air Machine
OA200V
HEPA Filter Module, Metal Frame 99.99%, 0.3µ OAHM
Carbon Filter Module
OCFM
Quick Clamp, 6”
QCW6
Quick Clamp, 3”
QCW3
Flexible Duct, 6”x25’
OAD625
Flexible Duct, 3”x25’
OAD325
Printer Friendly Specification Sheet
|
