The OmniAire 100V is a modular portable air filtration
system used for removal of hazardous airborne contaminants is areas
where a small airflow and quiet operation is required. Glove bags, work
benches, welding benches, and de-soldering stations are some examples of
applications for this machine. The modules can be stacked atop one another
or separated by as much as 25 feet. Also by adding an optional Y adapter
dual inlet hoses may be connected.
If you are dealing with hazardous material such as nuclear
waste the advantage of the modular design is that only the HEPA module must
be discarded as the blower will not be contaminated. The
HEPA module
contains a HEPA filter sealed between two ABS plastic adapters which allows
for easy connection to the blower. An optional
carbon filter module is available and can be either used in place of the
HEPA module or in conjunction with it.
SPECIFICATIONS
Airflow - 40-120 cfm Airflows are based on blower manufacturer
curves. Different HEPA filters may cause the flow to vary.
Weight - 20 lbs Blower Module Dimensions - 12.5" wide
12.5" high 13" long Filter Module Dimensions - 12" wide 12" high 18" long Cabinet - UL94 V0Flammability Rating ABS Plastic Filtration -
Primary/Secondary Filter - Dual-ply
Dustlok polyester pad
Standard HEPA Filter - Metal Frame 99.99% Efficiency @
.3 micron
individually tested and certified. Size 12"x12"x6"
Optional - Carbon Filter Module for odor control Power Requirement - 115 VAC/ 50-60 Hz .5 amps Controls -
Variable Speed Controller
Digital Hour Meter Inlet Ring Size - 3" diameter Outlet Ring Size - 6" diameter
