For your larger projects the OmniAire 18000 is the right tool. The modular
design of this system allows for ease of transport and many different
configuration choices. The 3 HEPA filter cabinets are connected to the
blower with 18" flex ducts which allows them to be placed up to 25 feet away
from the blower, and also allows them to be placed in different areas if
necessary. The design of the HEPA filter cabinets allows for the use of bag
filters or carbon vapor trap filters in place of the HEPA filters if
required.
SPECIFICATIONS
Airflow - 18000 cfm
2 - 22" vaneaxial Fans with 7.5hp motors
Airflows are based on blower manufacturer curves. Different HEPA filters
may cause the flow to vary.
Weight - Blower Unit - 900 lbs
Filter Cabinet 200 lbs with filters installed
Dimensions - Blower Unit - 32" wide
72" high
43"
long
HEPA Filter Module - 26" wide 80" high 28" long Filtration - Primary/Secondary Filter - Dual-ply
Dustlok polyester pad
Standard HEPA Filter - Wood Frame 99.97% Efficiency .3
micron
Power Requirement - 230V/60 Hz 3 phase 45 amp
Blower Cabinet - Aircraft grade aluminum, closed end rivet
construction.
All seams are silicone sealed before riveting. 4 4"
casters for ease
of movement.
Filter Cabinets - Powder Coated Galvanized steel, closed end rivet
construction,
All seams are silicone sealed before riveting. 4 3"
casters for ease
of movement. Each filter cabinet is individually
monitored for filter loading by a 0"-5" WC differential pressure gauge.
Controls -Dual motor starter boxes with 32A disconnects w/ lockout
feature
Start and Stop pushbutton switches for each blower
Power On Indicator for each blower
Individual hour meters for each blower
