OmniAire OA1500HS

1500 cfm negative air machine used in structural drying

1500 cfm negative air machine in use in structural drying application

 

OmniAire 1500HS negative air machine is designed to extract water vapor from inside walls and subflooring. This unique HEPA air filtration system is able to produce 6.75” W.C. suction and even at 4.5” W.C. of static pressure, the air flow is still at 1000 cfm. The inlet adapter has a 12” diameter ring for a variety of water vapor extraction tools.

SPECIFICATIONS

Airflow - 1450 cfm 
     Airflows are based on blower manufacturer curves. Different HEPA filters may cause
     the flow to vary.  
Weight - 105 lbs
 Dimensions - 24" wide 25" deep 43" high
Filtration -
     Primary/Secondary Filter - Dual-ply Dustlok polyester pad
     Standard HEPA Filter - Wood Frame 99.97% Efficiency .3 micron
     Optional HEPA Filter - Metal Frame 99.99% Efficiency .3 micron individually certified
Power Requirement - 115 VAC/ 50-60 Hz 15.4 amps
 Cabinet -
     Aircraft grade aluminum, closed end rivet construction. All seams are silicone sealed
     before riveting. 2 10" non-marking wheels and 2 hospital grade non-marking 3" casters
     for ease of movement.
Controls -
     ON/OFF Switch
     Pressure Gauge - 0" to 10" WC
Outlet Ring Size - 10" diameter          

                            Ordering Information

ITEM                                                                               PART #

OmniAire OA1500HS Negative Air Machine                   OA1500HS

HEPA Filter, Wood Frame 99.97%, 0.3µ                         OAH1616

HEPA Filter, Metal Frame 99.99%, 0.3µ                         OAH1616G

Primary/Secondary Filter (qty 20)                               OAP1818

Quick Clamp, 10”                                                            QC10

Flexible Duct, 10”x25’                                                    OAD10

                        Printer Friendly Specification Sheet