The Adaptidry ADP-5 or ADP-9 structural drying adapter connected to OmniAire 1500HS air purifier achieves high efficiency by dispersing intense drying power simultaneously to multiple areas around the room. Adaptidry vents can be used to create positive or negative pressure inside walls and sleepered floors, such as gym floors and sports courts.

Extracted air with water vapor and contaminants is purified through HEPA filter before it is discharged. This makes it safe to perform drying operations in occupied areas. Under negative suction, air can be extracted from the wall cavity or area needing circulation, and either directed into the room or outside.

It is not always necessary to drill holes in order to dry.The pressure is transmitted through the gap existing between floor, wall or ceiling cavities and causes the air to be exchanged rapidly, resulting in quick drying. The ducting can also terminate in areas that need air exchanged such as beneath stairs, in cabinet, etc.

Dry approximately 12 (ADP5) or 22 (ADP9) linear feet of :

• Cabinets

• Walls

• Hardwood floors

Spaces covered with tape can be left between the Wall Vents to extend the covered area and to adjust to different job situations.